Find out how to Make a DIY Pretend Olive Tree for Much less Than Shopping for | Thrifty Decor Chick

Find out how to make a synthetic olive tree for much less.

In the event you love the look of ornamental bushes in your house, however do not have a inexperienced thumb to maintain actual crops alive or the finances for an costly faux store-bought model, this tutorial for a fake potted olive tree is for you!

I’ve wished a tall plant for the basement for someday — we do get a superb
quantity of daylight down there, however not sufficient that I may maintain one thing
alive. 

This fake tree DIY was particularly cheap as a result of I obtained all of my provides at half the price. Search for
gross sales and use coupons! 

The first step: Determine your tree trunk

I began with the “trunk” of the tree. I may have simply gone and minimize a
thick department off of a tree. I used to be going to do this, however then I spotted how
chilly and snowy it was outdoors. I actually did not need to go forage
within the woods. 

So as a substitute I take a look at the “dried naturals” part on the craft retailer. They
had precise (skinny) wooden trunks, which cracked me up that we are able to purchase
a part of a tree on the retailer. However I wished one thing that appeared
just a little extra pure and natural than only a straight department. 

I figured these white branches on the left could be good: 

The package deal got here with three branches (for MORE olive bushes obvs) and I used
the largest one. 

I spray painted it brown…and was shocked when it appeared
actual! You need to use any brown paint — craft paint even. 

Step two: Connect your olive stems

This can be a manner higher bang to your buck. You will get a ton extra stems to make use of
for the worth, in comparison with the only ones. 

These even have a few of the most practical branches I’ve discovered. The silk lengthy leaves assist to fill it in much more and the fake olives are a sensible darkish brown/purple shade. 

Then begin including the minimize branches to your “tree” — this was rather a lot simpler than I
thought! 

I began with a number of on the suggestions of the highest branches. For these I connected the
olive branches with
brown floral tape. The brown blends into the tree branches very well: 

I needed to actually seek for them after I used to be completed to take this image! You
will not want a lot of the tape — I solely added a number of on the suggestions, however general
these did make for a extra practical look. 

For the remainder, I used a small drill bit and drilled tiny holes into the
branches: 

Then simply stick your olive department in! No glue or tape wanted. 

I did most of those at an angle so the branches would level upwards. Chances are you’ll
want to regulate your drill bits for the dimensions of your department. 

I might add a number of, step again and see the place it wanted extra, after which maintain
including. There is no proper or fallacious — simply is dependent upon the look you
need. 

I additionally added them the place the branches met for a extra practical look: 

Additionally, if the tip of a department was large enough, I drilled into these and caught
one in there. On these I discovered it useful so as to add a little bit of the floral tape so
it blended higher. 

Generally my drill bit went throughout a department — I did attempt to
keep away from that on the thinner branches as a result of I did not need to weaken them. 

If
you may, maintain your holes shallow, simply deep sufficient to stay the stem in.

I used to be just a little shocked and sort of tickled with how good it appeared as I used to be
going. I saved telling my household — “Look at my TREE!” It
really was turning out very well! 

Once I was completed with the entire thing, I touched up any of the unique white
department that confirmed once I drilled holes. I simply sprayed the spray paint on a
paper plate and used a Q-tip to use small contact ups. 

Step three: Plant your rustic fake olive tree

Once I was completed I used a block of exhausting foam in a plastic planter and caught the department in
there:

Chances are you’ll must make a starter gap for the department — do not break it making an attempt
to get it in! As you may see, I stuffed plastic baggage into the perimeters to make
certain my tall olive tree would not wobble. 

I had that readily available, nevertheless it is not costly. 

The inexperienced olive leaves are so wispy and fairly!:

It seems to be extra practical than a variety of the faux silk bushes I’ve seen in
shops:

I used to be nervous this DIY could be too good to be true for the worth. I used to be so fallacious!:

She’s so fairly! I introduced her to the entryway for higher gentle for photographs — however I
actually prefer it right here! Might need to make one other one. 😉 

Mine will keep within the basement lounge for now: 

I would wish to discover a greater planter for it will definitely. When it will get hotter out
I will make it everlasting by pouring fast dry cement into no matter planter I
ended up with. 

Replace! I discovered a extremely cool product that allowed me to completely “plant” this right into a pot: 

You break the seal between the 2 pockets to let the product combine collectively after which pour it into the planter together with your tree inside.

It expands inside seconds (really actually cool to observe) after which units up inside minutes. 

Preserve the dimensions of your planter in in thoughts when pouring it in! You’ll be able to minimize off any extra off the highest, however you do not need it going all over the place. 

After it was dry, I positioned the moss excessive of the froth: 

You’ll be able to customise these synthetic crops so some ways! Make yours a shorter tree for a tabletop show, a smaller one for tight areas, or go even greater and wider! 

Bear in mind, this DIY is for indoor use solely, though I believe it will be superb on a lined out of doors space like a porch or patio. 

Total my tree value me lower than $35 and the scale are 5 ft excessive with a couple of three ft width on the high. You’d spend at
least $100 to purchase that dimension. I had the planter, paint and moss already. 

I
extremely counsel gathering your provides when they’re on sale, however even in case you
pay full value will probably be cheaper than shopping for. 

Here is an inventory of the objects in a single spot in case you need to do this your self!

DIY OLIVE TREE MATERIALS:

Would you strive making certainly one of these synthetic bushes as a substitute of shopping for? It did not take me lengthy at
all and was sort of enjoyable. However I am just a little bizarre that manner. 🙂 

Pin this picture to save lots of this tutorial for later: