It gives the impression of pinch pleat drapes, however this undoubtedly works higher with thicker materials.
My workplace drapes would look good for some time, however the cotton cloth was simply too skinny to maintain them standing properly.
So after a number of weeks, I would up with the messy, slumped pleats such as you see above.
I’ve recognized about this straightforward repair for years (since my adorning days!), however have not ever taken the time to do it.
They’re very reasonably priced — I received ten yards of the tape and 20 hooks for $24.
That is sufficient pleater tape to repair a minimum of six customary curtain panels (most are round 54 inches large). I did have to purchase extra hooks for an additional venture.
It is really easy, and you do not have to know the best way to sew to do that. I am going to clarify each strategies!
For those who look shut, you’ll be able to see that the tape has a dotted information line on the prime:
This provides you the road to comply with as you are stitching. So good!
I pinned the tape to the again of the highest of the curtains after which ran it by way of the stitching machine:
The little line was so useful — stitching a straight line is tougher than it appears. 😉 For me anyway.
I ended up stitching it alongside the perimeters and backside of the tape as properly, so it was additional safe.
Ensure you examine the route of your tape earlier than stitching!
You want to have the ability to insert the material hooks from the underside, so ensure that these aren’t on the prime of your drapes.
Then it is time to determine the way you wish to place your pleat hooks. They slide proper into the little pockets on the again of the pleat tape:
That is the one half that takes a while!
You may wish to work out good spacing — I like odd numbers in the case of pleats so I used seven hooks:
You wish to area them out on the similar width in between. Mine weren’t precisely excellent, however so long as you are considerably shut you will not discover.
There are a number of methods to string your metallic hooks for a special look on the entrance of your cloth!
I used essentially the most primary and easiest way of inserting the 2 outer prongs into two side-by-side slots:
You possibly can see the easy pleat that offers you on the entrance. That is an inverted pleat that creates uniform spacing between every material ring.
It’s the least fussy for my part.
I liked the opposite choices too — right here it’s with simply the 2 interior prongs:
And with all 4 — that is the traditional pinch pleat look:
These pleats will soften only a bit with the material on prime.
Take into accout, the extra pleats you add, the much less width you should have in your curtain panels.
After all I am a loopy individual and could not simply take the drapes down and stitch this tape on. Simple, proper?
I took them down, determined they need to be washed, then figured a brand new, bigger material rod would look nice, hung that, sewed a brand new backside hem, then realized I wanted to spray paint the previous curtain rings:
After ironing the drapes and getting them again up, I used to be SO happy with how they appeared.
WHAT a distinction!!:
Let’s check out the earlier than once more, lets?:
So. a lot. higher.
I do not know why I waited so lengthy to do that. Stitching the tape on took no time in any respect. (Every little thing else I did took the time.):
I am so glad I hung a brand new curtain rod!
For those who do not sew or have a stitching machine, you’ll be able to nonetheless add this pinch pleat look to your drapes!
If in case you have a stitching machine, I do suggest utilizing that. The burden of the pleating tape and the hooks will could pull on the hemming tape over time. It would not be tough handy sew them both.
Now I plan to do that DIY pleat remedy on the opposite units of rod pocket curtains we have now in the home.
This pleating tape might be sewn proper over the pocket on the prime or any tabs on the again of your retailer purchased curtains.
The tender pleats give window therapies the next finish search for certain. It is one of many greatest bangs for the buck I’ve performed to customise them through the years:
I feel I’ll take the hem on these up only a little greater so that they “kiss” the ground.
As I discussed, you can even add pleats to curtains which have grommets or tab prime designs.
I just lately hung new drapes in our bed room, however they got here with the tabs on the again. These by no means slide properly sufficient for me, so I minimize them off:
I then sewed the pleat tape onto the again:
I took the darkish grey drapes that had been in our room and hung them within the basement, however these hung with grommets.
I pulled out the scissors and stitching machine once more and minimize the grommets off so I might add the tape to the again as a substitute:
Simply take a look at the distinction within the drapes after including the pleating tape made!:
The pleated drapes are on the left — is not it wild how a lot fuller they grasp now?
That is a kind of little particulars that makes a giant distinction within the general really feel of a room.
I simply like it!
Have you ever tried this DIY pinch pleat curtain hack? It appears SO a lot better!
Trending Merchandise
