Gown up your boring tray ceiling with these straightforward wooden beams!
These wooden beams are a simple solution to give some character to your tray ceiling. I additionally painted our ceiling so as to add to the comfy really feel.
This beam venture is considered one of my favourite DIYs on this home thus far! I work with Minwax sometimes and this venture is one other one I completed utilizing their superior merchandise.
This publish might include affiliate hyperlinks on your comfort.
I’ll earn a small fee when you make a purchase order via hyperlinks.
It has modified a lot since then! These beams and the painted ceiling added a lot heat to this area.
Once I see a tray ceiling I see a possible venture! I’ve seen many therapies on a lot of these ceilings, from including crown to putting in wooden to the tray half.
This was a unique tackle the standard tray ceiling remedy and we LOVE the way it turned out!
I had assist with the primary a part of this venture and due to that I did the steps a little bit backwards. I might have a lot most popular to color the ceiling after which stain the wooden after, however as a result of I used to be on the mercy of another person’s schedule, I did the steps the alternative approach I might usually advocate. Extra on that in a bit!
The purpose was to create “beams” across the sides of the tray ceiling. We had two choices — take the wooden and 45 it on the desk noticed so once we nailed the facet and backside collectively, it will appear to be a true beam.
Or, take the 2 items of wooden and simply nail them into one another to create the look of a beam. You will see the seam the place they meet, so it would not look fairly as genuine.
We went with the latter, principally as a result of we have been utilizing very lengthy items of wooden — two at ten toes and two at 16 toes. I do not belief that the mitered corners would have met up completely at these lengths.
I am glad we did not go that course. It will have been WAY extra work and the ultimate end result appears to be like nice with out that additional step.
Add your helps to the ceiling and wall
To start out, you will want one thing to connect your wooden to. The wooden “beams” are solely two sides — the underside and the facet.
So the piece on the ceiling (make sure you connect to studs) was there to stabilize the facet board, and the wooden connected to the facet of the tray ceiling was there to carry the underside piece in:
I hope that is sensible. The arrows are pointing to the items that the wooden that makes up the beam have been connected to. You may see the underside a part of the beam began in that picture above.
Full dimension boards aren’t wanted — you can even use scrap wooden to do that. Simply be sure that it is the identical distance from the tray wall all all through.
Set up the edges and backside of your beams
When the underside items have been up, the edges may go on — nailed into the board connected to the ceiling after which nailed to the underside piece. The arrows present you the place to nail:
While you’re accomplished you have got “beams” operating across the exterior of the tray ceiling.
Like I mentioned…the perfect solution to full this venture could be to prep earlier than hanging the beams. I painted the ceiling after the wooden was up.
Portray a ceiling is rarely enjoyable however it went faster than I although it will. I used an extended portray pole to get the 2 coats up.
We moved furnishings and put a giant painter’s material over every little thing as I moved across the room. I did need to climb up and down the ladder 1,000,000 instances to chop in across the wooden.
Portray earlier than the wooden goes it up could be SO a lot simpler since you would not have to fret about reducing in.
I painted the ceiling in Westchester Grey by Sherwin-Williams (flat end!) after which it was time to start out the staining course of. Even with the wooden already put in, it went a lot simpler than I assumed it will!
Prep on your stain
I taped off the ceiling after which began with what I feel is a VERY necessary product, particularly on a venture like this:
Extra importantly, it provides you time to stain the wooden, which is extremely necessary on a venture like this that has giant items you are engaged on:
It is necessary to maintain a “moist edge” when staining — which implies you wish to be certain you do not apply the stain after which let it dry in any respect at any level. When you do, you will see the place you stopped and began.
This wooden conditioner makes it way more forgiving so you have got much more time to work in your stain.
Stain and shield the wooden
Through the years I’ve discovered the simplest solution to apply stain is with a rag. Gloves are wanted!
You simply use the rag to wipe the stain on, then rub it into the wooden:
See that edge the place it is moist and assembly the half I had simply accomplished? (The stain to the best appears to be like prefer it’s dry however I had simply utilized it.) If the wooden was not conditioned a few of that line would keep — and it would not look good!
Due to the pre-conditioner, it got here collectively properly. No line!:
On the primary beam, I did the primary coat and stepped all the way down to test it out. I often solely use one coat of stain on my tasks — extra coats will deepen the stain however I discover it is not often wanted.
I like the Provincial shade, however it was leaning a little bit orange on this pine. I did not actually discover it till I stepped again.
It is a ravishing shade! Undoubtedly extra brown, which is what I needed.
Here is a take a look at the distinction — Provincial on the left, then with a coat of Jacobean on high on the best:
That is one more reason I like working with stain! You may experiment with totally different layers of colours and get a customized look. You may as well combine stains forward of time to discover a shade that is excellent on your wants.
Once more, you will want gloves and a clear rag to use. You may see how the poly on the left actually deepens the stain and makes it look even higher!
One factor to notice right here — if you stain there might be fumes! I had the home windows open all day every day and had an air air purifier operating consistently. We did not sleep on this room for a pair days.
In any case was dry, we have been lastly in a position to take pleasure in this room once more…and we’re obsessive about the ceiling! It appears to be like superb and I could not be happier with it:
It utterly adjustments the texture of the entire room. It would not darken the room in any respect — simply provides a heat, customized contact that I like to put in mattress and take a look at. 😉
Due to the ceiling top and having a bunch of home windows in right here, it would not make it really feel closed in in any respect. It does make it really feel way more cozy and that is our favourite half:
I am contemplating portray the dresser now too — nonetheless deciding on that one. Possibly black?
My favourite half — the earlier than and after pics! Here is a reminder of the way it regarded a number of weeks in the past:
And the way it sorted this ceiling and beam venture! Would not that fixture look nice towards the darkish ceiling?:
Listed below are a number of ideas for this tray ceiling wooden beam venture:
- If you are able to do the staining and portray earlier than the wooden goes up, that is perfect. However it actually wasn’t that large of a deal to do it after. I assumed it was going to be lots worse!
- We did not minimize down the width of the boards — they’re off the shelf and simply the size was minimize. We used 1×4 and 1×12 boards. We discovered the lengthy 16 foot boards at an area lumber retailer (I do not imagine the large field {hardware} shops carry that size however I may very well be unsuitable.)
- The 1×12 used for the facet piece did not go all the way in which to the underside of the tray ceiling, which does not trouble me in any respect. You do not even discover it.
See one other considered one of my favorite stain makeovers here!:
Trending Merchandise
