This tutorial will take you step-by-step via our basement bar construct made
with wall cupboards as the bottom.
I am so excited to share this DIY bar undertaking with you! I had this in my head
for years, and I lastly completed it up lately. There’s even a secret
door. 😉
I knew I needed to make use of that area within the nook in opposition to the wall, in order that
would want a 24 inch vast cupboard (as a result of the prevailing base cupboards are 24
inches deep).
The ultimate plan I made a decision on was three cupboards — two 24 inch cupboards and
one 21 inch one. In hindsight, we may have simply carried out three 24 inchers, however
I did not need the doorway to this area to be too tight.
Be sure to account for the countertop and/or any ornamental finish items
that may add a little bit of size to the top of your bar as nicely.
2. Determine on the cupboards on your bar.
When deciding in your base cupboards for this undertaking, you may must resolve
if you’d like a counter peak bar (like an island), or a standard, greater
bar peak.
Counter peak is often between 34 to 36 inches tall and bar peak is
round 40 to 42 inches excessive.
We needed our bar to be greater for bar stools, so I wanted to both construct
bases at that peak or purchase them. I knew this construct was going to be plenty of
work, so I went the marginally simpler route and ordered cupboards.
The issue is, base cupboards solely are available a number of heights, and retailer purchased
variations are normally 34.5 inches tall. So, I went with my go-to for all of
my constructed ins and bookcases…higher cupboards!
Wall cupboards aren’t as deep as base cupboards (solely 12 inches entrance to
again), however that was going to be a lot for our wants.
3. Safe your cupboards into the ground.
When putting in higher cupboards right into a ground, you may first want a base to
increase it off the bottom a bit, to create a toe kick. This additionally makes wall
cupboards look much less…wall cupboards.
I do that by constructing a wooden base within the peak that I would like:
DIY bookcases
as nicely. You’ll be able to both connect them to the underside of the wall cupboards or
construct lengthy base that may be connected to the ground and/or partitions, after which
set up the cupboards on prime.
For this half, we used 2x4s and I bought assist attaching the bottom to the cement
ground in our basement. You want a powder actuated hammer device to safe wooden
into the cement, so I had the professionals try this.
After the bottom was safe, I used to be in a position to set up the cupboards into it with
screws:
I marked the place the 2x4s had been beneath and screwed via the underside of
the cupboards to connect the cupboards.
I ended up altering the spacing only a bit as I used to be putting in, so the top
cupboard ended up hanging over the 2x4s only a bit. I knew I might be masking
that anyway:
Subsequent up, we had the flooring prolonged a number of toes to satisfy up with a doorway
close by. It appeared SO significantly better and made this room really feel a lot greater:
4. Add trim and baseboards.
You’ll have seen that the top cupboard (closest to the wall) is put in
going through the other means from the others.
I prefer to make the most of empty area if I can. I hate losing potential
storage and I knew I may make this look cohesive and create a “secret”
door within the course of.
My first step was to cowl the backs of the opposite two cupboards (those
going through into the kitchenette) with skinny plywood:
I took these boards all the best way right down to the ground and to the top of the bar
as nicely.
Once I put in the cupboards, I positioned the one closest to the wall
ahead by 1/4 inch so it might be flush with the plywood on the remainder of
the bar.
Flathead screws work greatest for this, as a result of they are often sunk into the wooden
after which stuffed:
favorite wood filler
after which in between the boards as nicely, so it appeared like one giant board.
(I used to be utilizing up some scrap, in any other case you might have one piece reduce to the
measurement you want.) Be sure to let the filler dry utterly after which do a
mild sanding.
After that was dry and easy I began portray. I had the cupboards shade
matched at Sherwin-Williams by taking a door into the shop.
As a result of I needed to match the tremendous easy end of the shop purchased
cupboards, I did an excellent sanding after every coat of paint:
I additionally did extra coats than common, to actually fill in that texture on the
plywood.
plywood went to the ground, I simply nailed them on prime. I used
these primed 1×6 inch boards
as the bottom:
With every little thing painted, it was time to determine tips on how to make that present
cupboard door look seamless with the remainder of the bar entrance.
To do that, I grabbed some MDF boards in the identical measurement because the trim round
the cupboard entrance (2.5 inches vast). I created the look of two extra cupboard
doorways by including these panels…it labored superbly!:
You actually should rise up shut to determine the place the true cupboard
door is! I like it.
I am so happy with how this secret door turned out. It is a enjoyable little
addition:
cut and installed butcher block
for the remainder of this kitchen, however needed one thing completely different for the
island.
I went to a stone warehouse with a particular look in thoughts, and could not
consider it when I discovered precisely what was in my head!
I cherished this black granite with the gold and white veining all through:
This specific stone known as Orinoco granite.
I actually needed a waterfall look, the place the countertop continues onto the
aspect of the top cupboard. To avoid wasting somewhat bit of cash, they did this look
by reducing the granite in order that the highest prolonged over like an everyday counter,
and the piece on the aspect was reduce in order that the motion of the granite
continues seamlessly:
This was simpler than the proper mitered reduce wanted for a standard
waterfall counter. It turned out lovely!
5. End up the ultimate particulars.
Trending Merchandise