![](https://cmhomeanddesign.com/wp-content/uploads/2024/04/wine-cork-wall-frame.jpg)
make a DIY ornamental wine cork wall round a dart board.
We had a TON of wine corks sitting round that I’ve collected for years. I did not know precisely what I used to be going to do with them, however I knew I might give you one thing ultimately.
I chortle after I take into consideration how I bought a bag of corks on-line practically 15 years in the past (earlier than my wine-loving days) for a craft mission! Now we’ve got loads. 🙂 I’ve saved them from wine nights, particular dinners or enjoyable journeys over time.
I like the look of a cork wall, however then found one put in round a dart board and thought that was such a sensible manner to make use of up the corks and shield our partitions.
After all this cork mission would make for an awesome accent wall by itself as nicely!
1. Make your body on the wall
The dart board was such a ache to hold (I misplaced the directions), so I did not need to take away it. The center of the dart board needed to be hung at particularly 5 toes, eight inches off the bottom, so I used to be working round that.
Since I wished the wine corks to butt up in opposition to one thing, I discovered an ornamental trim that had a skinny and thick aspect.
This publish might include affiliate hyperlinks on your comfort.
I’ll earn a small fee when you make a purchase order by way of hyperlinks.
In the event you do not thoughts potential injury to your partitions sooner or later, you’ll be able to transfer on to step three. I like to recommend my subsequent step first although.
2. Cowl the wall (if desired)
Once more, this half could be simpler to do with out the dart board, however it wasn’t too dangerous!
I used scrap wooden to cowl the partitions contained in the trim. This gave me a floor to connect the entire wine corks to.
It does not must be good in any respect — you may be protecting it! However this prevents loads of potential wall injury if we ever determine to take this down:
I by no means use glue of any form on our partitions, to forestall drywall injury. I discovered my lesson years in the past!
After the scrap wooden was put in contained in the framed space, I painted every little thing to match the partitions (Westchester Grey by Sherwin-Williams):
There are some gaps between the corks if you’re executed, so I am glad I did a couple of coats of the darkish paint.
3. Begin making use of your corks
It was lastly time for the enjoyable (however LOOOOONG) half!
You will need to determine on the look of your wine cork wall. At first I used to be contemplating a enjoyable design the place the corks went each horizontally and vertically. However after making use of my first few I knew that may take. actually. without end.
I additionally thought of putting in the wine corks on their ends so you possibly can see the wine shade.
However I spotted I would wish a ton of corks to fill this area if I glued them that manner. We had loads of corks, however not that many.
So ultimately, I went with the best design I might consider — simply putting in them vertically throughout within the body:
I made certain to test for stage each few strains, though it nonetheless ended a little wonky on the backside. I discovered it was additionally useful to eyeball every line, since the entire corks have been completely different sizes and thicknesses.
This sliced by way of every cork like buttah (even lengthwise).
That is not a fast mission! 😂 It took me an hour or two a day over three days to complete it up. However general, it was very straightforward.
I began from the highest with the corks and moved backwards and forwards for every line.
There was an open spot beneath the dart board I needed to fill in, so I minimize a couple of corks lengthwise and glued them in:
It seems to be fairly seamless. I minimize smaller items to fill in any empty spots on the finish of the rows as nicely.
I like that we will see a few of the wine stained ends:
I completely LOVE how this turned out! It was definitely worth the hours of gluing, and gluing…and gluing:
I might have executed a sq. form, as I do not see the darts hitting fairly that low more often than not. However I like that this makes extra of a press release.
This wine cork wall will not catch each stray dart, however it’s going to assist. And it is such a enjoyable ornamental accent in our basement:
It was enjoyable to undergo the corks, so many introduced again enjoyable reminiscences. I attempted to connect every one so the model or emblem was dealing with out.
Our wine cork wall behind this dart board measures about 30 by 60 inches and I used nicely over 1,000 wine corks. (!!) Now you understand why this took a couple of days!
I would not have had practically sufficient if I had glued them standing up on the wall — I can not even think about what number of that may have taken.
Oh, and our basement bar is completed! I am going to share the bar that I constructed very quickly. So enjoyable!
If I not noted any particulars about this mission, please let me know within the feedback.
Trending Merchandise